top

I would like to view:   All Products   Feeding Equipment   Stable Equipment

7' Hay and Grain Feeder Horse/Cattle

1-1/2" round steel tube, 14-gauge throughout. The feeder is 38" wide, 7' long, 5'6" tall and will hold four bales of hay. Each hay rack bar is made of 3/4" round 14-gauge tubing and is 4" on center, allowing the animal to pull out enough hay without wasting it. The rotationally molded tub is made from medium density polyethylene with U.V. inhibitors and divided compartments. Each tub compartment has a drain hole for water. Known as the four-horse model, this is our second-best selling item for the past 8 years.

Weight: 220 lbs.
Color: Black and Gray

Cattle feeder is the same as horse only 4'6" tall. Works well for people who own and raise calves and cattle. The tub can be loaded down with feed and will not buckle or give

Weight: 210 lbs.
Color: Black and Gray

3.5 Hay and Grain Feeder Horse/Cattle

1-1/2" round steel tube, 14-gauge throughout. The feeder is 38" wide, 3.5' long, 5'6" tall and will hold two bales of hay. Each hay rack bar is made of 3/4" round 14-gauge tubing and is 4" on center, allowing the animal to pull out enough hay without wasting it. The rotationally molded tub is made from medium density polyethylene with U.V. inhibitors and divided compartments. Each tub compartment has a drain hole for water. Known as the two-horse model, this is our top selling item for the past 8 years.

Weight: 150 lbs.
Color: Black and Gray

Cattle feeder is the same as horse only 4'6" tall. Works well for people who own and raise calves and cattle. The tub can be loaded down with feed and will not buckle or give

Weight: 140 lbs.
Color: Black and Gray

Wall Mount Hay and Grain Feeder w/ Hanging Attachment

Our wall mount feeder is large and durable. We use 3/4" tubing, instead of rod. When you weld tube on tube, you get a much stronger weld. This design will hold a couple pallets of hay and will never break down.

14-gauge 3/4" round hay bars, 1" x 1" x 1/8" thick angle iron, 16 gauge 1" x 1" square, 14-gauge 1" round, and 1" x 2" square 16-gauge.

A 5 gallon poly tube has been incorporated for use of grain. Perfect for stalls, barn feeding, or hanging over a fence. 37" tall, 22" wide, 20" deep. Poly back included.

Hanging attachment sold separately. Hanging attachment is made of 2" flat stock with one hole that bolts to either a wall mount hay rack or a wall mount hay and grain feeder, allowing them to hang over anything 2" or less.

Weight: 40 lbs.
Color: Black and Gray

Wall Mount Hay Rack

This model is basically the same as the wall mount hay and grain feeder, without the plastic grain tub. They are very lightweight and very strong. There are no sharp edges anywhere on either the feeder or the attachments. All open ends are closed using plastic plugs. This keeps bees and wasps from nesting inside.

Size: Height 27" Width 23" and Depth 20"

14 Gauge 3/4" round hay bars, 1" x 1" 16-gauge square tube.

Made for stall and barn feeding.
Weight: 18 lbs.
Color: Black

10' Cattle Bunk Feeder

Our cattle bunk feeder is heavy duty, strong, and safe. 14-gauge 1-1/2" tubing makes up the frame of this feeder while the 16-gauge sheet metal makes up the feed compartment. The 1" round tube is roll formed and placed on the sheet metal edges so there is nothing sharp cutting into the cattle's chest. All ends are closed, keeping out bees and wasps.

The trough dimensions are:
Height 22" Length 10' and Depth 9".

This item cannot be easily pushed around by livestock or tipped over due to its weight. The runners make for easy pulling around with a tractor.
Weight: 170 lbs.
Color: Gray

Free Standing Saddle Rack Square Tube

This design is perfect in a tack room or to place anywhere it can sit flush against the wall saving a lot of space. All open ends are plugged. They are available for 2 or 3 saddles.

16-gauge 1" x 2" square tube and 5/16" steel rod. There are extra support bars under each saddle arm for additional strength. They will hold English or Western saddles. Each saddle arm will hold 300 lbs. Not top heavy, and is built even throughout.

3 Saddle: Height 66-1/4" Width 21" Depth 23"
Weight 24 lbs. Color: Black
2 Saddle: Height 47-1/2" Width 21" and Depth 23"
Weight: 16 lbs. Color: Black

Hanging Saddle Rack

16-gauge 1" x 1" square tube and 5/16" steel rod. Very lightweight, yet durable. Will hold English or Western saddles. Extra support brace under each saddle arm. Will hang over a 2 x 4 or anything of that size.

1 Saddle: Height 8" Width 12" Depth 22"
Weight 4 lbs. Color: Black
2 Saddle: Height 18" Width 12" and Depth 22"
Weight 6 lbs. Color: Black
3 Saddle: Height 33" Width 12" Depth 22"
Weight: 8 lbs. Color: Black

These are perfect for the on-the-go horsemen. Great to take for camping, they are small so they do not take up a lot of room. These are our best selling saddle racks. All open ends are plugged and smooth.

Blanket Holder

This design is a big space saver. When not in use it lies flat on the wall and is not in the way. This is designed to move from one side to another, making drying blankets easy. They will not sit on top of each other with the swivel design. There is little assembly required. These are available in 1, 2, or 3 blankets.

1 Blanket:
Weight: 2 lbs. Color: Silver

2 Blanket:
Weight: 3 lbs. Color: Silver

3 Blanket:
Weight: 4 lbs. Color: Silver

Post Driver

This item is made of 2.5" round 1/8" thick steel tubing and 2-1/2" solid round handles. The top is welded shut with 2-1/4" solid steel bar. This design is very heaving, making post driving faster and easier. The color of this item is red making it easy to spot anywhere.

Length: 36"
Color: Red
Weight: 20 lbs.


0520 E. 625 S. North Judson, IN 46366 | Phone: 574-896-2971 | Fax: 574-896-3688